[Q250-Q270] Pass Cisco Implementing Cisco SD-WAN Solutions Exam in First Attempt Guaranteed Updated Dump from VCETorrent!

Share

Pass Cisco Implementing Cisco SD-WAN Solutions Exam in First Attempt Guaranteed Updated Dump from VCETorrent!

Pass 300-415 Exam with 446 Questions - Verified By VCETorrent


Cisco 300-415 certification exam is designed for professionals who want to validate their skills in implementing Cisco SD-WAN solutions. 300-415 exam is part of the CCNP Enterprise certification track and is intended for network engineers, system administrators, and IT professionals who are responsible for managing and implementing SD-WAN solutions.

 

NEW QUESTION # 250
Refer to the exhibit

Refer to the exhibit Which command allows traffic through the IPsec tunnel configured in VPN 0?

  • A. service FW address 1.1.1.1
  • B. service netsvc1 vpn 1
  • C. service netsvc1 address 1.1.1.1
  • D. service local

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge-20-x/policies-book/service-chaining.html


NEW QUESTION # 251
When a WAN Edge device joins the SD-WAN overlay, which Cisco SD-WAN components orchestrates the connection between the WAN Edge device and a vSmart controller?

  • A. vManage
  • B. vBond
  • C. APIC-EM
  • D. OMP

Answer: B

Explanation:


NEW QUESTION # 252
Which two products are used to deploy Cisco WAN Edge Router virtual platforms? (Choose two.)

  • A. Cisco ENCS 5000 Series
  • B. Cisco UCS
  • C. Sun Enterprise M4000 Server running Sun Solans
  • D. HP ProLiant DL360 Generatton10 running HP-UX
  • E. Sun SPARC Node running AIX

Answer: A,B

Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/routers/5400-enterprise-network-compute-system/datasheet-c7


NEW QUESTION # 253


Refer to the exhibit vManage and vBond have an issue establishing a connection with each other Which action resolves the issue?

  • A. Configure the encapsulation ipsec command under the tunnel interface on vManage
  • B. Remove the encapsulation ipsec command under the tunnel interface of vBond
  • C. Change the organization name on both controllers to match vipteta.com.
  • D. Reconfigure the system IPs to belong to the same subnet

Answer: C

Explanation:
Explanation
https://community.cisco.com/t5/sd-wan-and-cloud-networking/encapsulation-ipsec-on-vbond/td-p/4451149
"encapsulation" command under vBond tunnel-interface has no meaning and effect.


NEW QUESTION # 254

Refer to the exhibit. The ge0/0 interface connects to a 30-MB link. A network administrator wants to always have 10 MB available for high priority traffic. When lower-priority traffic busts exceed 20 MB. Traffic should be redirected to the second WAN interface ge0/1. Which set of configurations accomplishes this task?

  • A.
  • B.
  • C.
  • D.

Answer: C

Explanation:

https://www.cisco.com/c/dam/en/us/td/docs/routers/sdwan/configuration/config-18-4.pdf#page=546


NEW QUESTION # 255
Which feature builds transport redundancy by using the cross link between two redundant WAN Edge routers?

  • A. quality of service
  • B. TLOC extension
  • C. OMP
  • D. zero-touch provisioning

Answer: B

Explanation:


NEW QUESTION # 256
The Cisco SD-WAN engineer is configuring service chaining for a next-generation firewall located at the headquarters. Which configuration creates the service?

  • A.
  • B.
  • C.
  • D.

Answer: A


NEW QUESTION # 257
Which interface does Cisco Catalyst SD-WAN Cloud OnRamp for IaaS use to set up the customer gateway and map the host VPC to a transit VPC in an AWS environment?

  • A. GigabitEthernet3
  • B. GigabitEthernet1
  • C. GigabitEthernet4
  • D. GigabitEthernet2

Answer: D

Explanation:
In Cisco Catalyst SD-WAN Cloud OnRamp for IaaS (specifically in AWS), the GigabitEthernet2 interface is used to:
- Set up the customer gateway
- Map the host VPC to the transit VPC
This interface handles the integration and dynamic route exchange between the SD-WAN overlay and AWS networking components.


NEW QUESTION # 258
An administrator must configure an ACL for traffic coming in from the service-side VPN on a specific WAN device with circuit ID 391897770. Which policy must be used to configure this ACL?

  • A. central control policy
  • B. app-aware policy
  • C. central data policy
  • D. local data policy

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge/policies-book/Policy-basics.h


NEW QUESTION # 259
Which protocol is used for the vManage to connect to the vSmart Controller hosted in Cloud?

  • A. HTTP
  • B. NETCONF
  • C. PnP Server
  • D. ZTP

Answer: B

Explanation:


NEW QUESTION # 260
Refer to the exhibit.

The SD-WAN network is configured with a default full-mesh topology. The SD-WAN engineer wants the Barcelona WAN Edge to use MPLS TLOC as the preferred TLOC when communicating with Rome site.
Which configuration must the engineer use to create a list to select MPLS color toward the Rome TLOC?

  • A.
  • B.
  • C.
  • D.

Answer: B


NEW QUESTION # 261
Which feature delivers traffic to the Cisco Umbrella SIG cloud from a Cisco SD-WAN domain?

  • A. IPsec tunnel
  • B. local umbrella agent
  • C. L2TPv3 tunnel
  • D. source NAT

Answer: A

Explanation:
The Cisco Secure Internet Gateway relies on tunnels, more specifically IPSec tunnels from a WAN edge device to communicate to the Cisco Umbrella Secure Internet Gateway (SIG).
https://www.cisco.com/c/en/us/support/docs/routers/sd-wan/217562-configure-umbrella-sig- tunneles-on-activ.html#toc-hId-1250395120


NEW QUESTION # 262
Which feature template configures OMP?
A)

B)

C)

D)

  • A. Option B
  • B. Option C
  • C. Option A
  • D. Option D

Answer: A


NEW QUESTION # 263
Which service VPN must be reachable from all WAN Edge devices and the controllers?

  • A. VPN10
  • B. VPN0
  • C. VPN215
  • D. VPN512

Answer: A


NEW QUESTION # 264
Refer to the exhibit.

Refer to the exhibit The engineering must assign tags to 3 Of its 74 server networks as soon as they are advertised to peers These server network must not be advertised AS which configuration fulfil the requirement?

  • A.
  • B.
  • C.
  • D.

Answer: C


NEW QUESTION # 265
Refer to the exhibit. An engineer is performing a proof of concept before migrating to the Cisco Catalyst SD-WAN solution in the data center by configuring the WAN vEdge101 device. Which configuration accomplishes the task?

  • A.
  • B.
  • C.
  • D.

Answer: D

Explanation:
The goal is to test SD-WAN connectivity over public and private transport (as shown in the diagram with Public and Private Network clouds) Color silver is a valid SD-WAN transport color often mapped to internet.
Color gold is used for private WAN (MPLS).
This matches the proof-of-concept topology and is appropriate for standard SD-WAN transport scenarios, unlike custom or undefined colors shown in other options.


NEW QUESTION # 266
An engineer is tasked to improve throughput for connection-oriented traffic by decreasing round-trip latency.
Which configuration will achieve this goal?

  • A. turn on "Enhance ECMP Keying"
  • B. turn off "Enhance ECMP Keying"
  • C. turn off "Enable TCP Optimization"
  • D. turn on "Enable TCP Optimization"

Answer: D

Explanation:

https://www.cisco.com/c/dam/en/us/td/docs/routers/sdwan/configuration/config-18-2.pdf#page=530


NEW QUESTION # 267
Which configuration changes the packet loss priority from low to highly?

  • A.
  • B.
  • C.
  • D.

Answer: B

Explanation:

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/qos/vEdge-20-x/qos-book/forwarding-qos.ht


NEW QUESTION # 268
What are two attributes of vRoute? (Choose two)

  • A. carrier
  • B. service
  • C. encapsulation
  • D. domain ID
  • E. originator

Answer: B,E


NEW QUESTION # 269

Refer to the exhibit A user has selected the options while configuring a VPN Interface Ethernet feature template What is the required configuration parameter the user must set in this template for this feature to function?

  • A. The "Shaping Rate (Kbps)" field must be configured with a value
  • B. The "IP MTU" field must be increased from the default value of 1500 to support the additional overhead.
  • C. The "Bandwidth Downstream" field must be configured with a value
  • D. The "Adaptive QoS" field must be set to "on"

Answer: A


NEW QUESTION # 270
......

Penetration testers simulate 300-415 exam: https://examcollection.vcetorrent.com/300-415-valid-vce-torrent.html