Authentic Best resources for FBAP_002 Test Engine Practice Exam
[2022] FBAP_002 PDF Questions - Perfect Prospect To Go With VCETorrent Practice Exam
NEW QUESTION 21
A customer has multiple FlashBlades and reports performance issues that occurred in the past 24 hours.
Where should the architect go to identify the issue?
- A. Dashboard view
- B. Expanded Card View under Appliances
- C. Performance view under Analytic ***
- D. Alerts view under Messages
Answer: C
NEW QUESTION 22
A FlashBlade is designed with a properly implemented single 4x40Gb/s LAG.
During implementation, the architect is informed that the ISL on the uplink switches in broken. The customer has no budget to repair or replace it. What should the architect do?
- A. Change out the 40Gb/s cable for breakout cable.
- B. Remove all uplink from FM2.
- C. Using the same LAG, create a second subnet and VIP.
- D. Divide the single LAG into one LAG per switch. ***
Answer: D
NEW QUESTION 23 
An architect need to create capacity sizing of FlashBlade to move data from a 6-year old EMC-Dell Isilon. The current Isilon solution consumes almost 1.3PB. There are three workloads:
-Warehouse application (40 TB, estimated compression ratio 2:1, IO size 8K)
-Images (20 TB, estimated compression ratio 1.0:1 average image size 1M)
-Log files (40 TB, estimated compression ratio 4:1, average file size 4k) What is the required FlashBlade configuration?
- A. 7x17TB blades ***
- B. 15x52TB blades
- C. 42x52TB blades
- D. 15x17TB blades
Answer: A
NEW QUESTION 24
A customer has noticed their all-flash arrays are constantly running at or near 100% load and impacting application performance. They are running dozens of applications on the arrays and ask for help to identify some workloads that could be moved to another storage system to reduce load and improve overall performance of all applications.
Which (three) workload or data characteristics should an architect look for to identify potential candidates for migration to FlashBlade? (Choose three.)
- A. Highly transactional application.
- B. Large number of simultaneous connections
- C. Applications that can use NFS or S3 ***
- D. Applications requiring high throughput ***
- E. Low latency is critical to application performance. ***
Answer: C,D,E
NEW QUESTION 25
What is the speed of the connections between individual blades and the midplane?
- A. 1Gb/s
- B. 10Gb/s ***
- C. 100Gb/s
- D. 40Gb/s
Answer: B
NEW QUESTION 26
A customer is adding snapshot policies so that some file systems can be tiered based on importance to the business.
-1 file system with high priority
-3 file systems with medium priority
-2 file systems with low priority
How many snapshot policies does the customer need to protect all of their file systems?
- A. 3 ***
- B. 0
- C. 1
- D. 2
Answer: A
NEW QUESTION 27
An oil company moves geological data between their offices in Dubai and Houston for redundancy. The data is accessed via NFS mounts on a cluster of three 10GB connected Linux servers at each location.
A series of cron jobs are leveraged to replicate data from data storage pool A in Dubai to data storage B in Houston and from data storage A in Houston to data storage pool B in Dubai.
Data in storage pool A is read-write, updated by 50 cellular connected data collector running in the field, and deleted after 30 days.
Data in the storage pool B is read-only, queried by the firm's analytics team, and copied to a cloud-based archive repository every 30 days.
The total amount of data in pool A in Dubai is 1.5PB
The total amount of data in pool B in Houston is 500TB
The data is not expected to grow in the next 12 months and is compressed by the application.
Which configuration should the architect present to meet this customer needs?
- A. A Multi-Chassis FlashBlade with 17TB blades for each site focusing on performance.
- B. A Multi-Chassis FlashBlade with 52TB blades for each site and third-party replication software. ***
- C. A Multi-Chassis FlashBlade with 17TB blades for each site and third-party replication software.
- D. A Multi-Chassis FlashBlade with 52TB blades for each site focusing on simplicity.
Answer: B
NEW QUESTION 28
A customer is standing up a new 30x17TB FlashBlade system.
The customer's environment is as follows:
1.The upstream switches are located 50 feet away
2.The upstream switches have the required number of 100Gb/s interfaces.
3.The customer is conscious about data availability.
4.The customer requires the use of 4 LAGs
What is the minimum number of cables required?
- A. 4 active QSFP + to QSFP + cables
- B. 8 active QSFP + to QSFP + cables ***
- C. 4 passive QSFP + to QSFP + cables
- D. 8 passive QSFP + to QSFP + cables
Answer: B
NEW QUESTION 29
A customer need to analyze the performance data outside of Pure1 and Purity//FB.
Which two tasks should the customer perform? (Select two.)
- A. Export VM Analytics to csv
- B. Export csv from Pure1 ***
- C. Set up scheduled job to send csv analytics to mail recipient. ***
- D. Configure SNMP to send traps to destination under Messages/SNMP.
- E. Use REST API to pull data from Pure1
Answer: B,C
NEW QUESTION 30
A state agency wants to store property deed image in multi-page .tif format on a FlashBlade NFS file system.
What compression ratio should the architect utilize for sizing?
- A. 5.1:1
- B. 1.1:1 ***
- C. 2.0:1
- D. 3.6:1
Answer: B
NEW QUESTION 31
A customer needs to support 10 million files per folder for their AI environment.
What is their limiting factor on a traditional file system?
- A. Threads
- B. Folders
- C. Blocks
- D. Inodes ***
Answer: D
NEW QUESTION 32
A company has a datacenter with a lot of electromagnetic interference. Their switches are 9m away from the FlashBlade and do NOT support speed faster than 10Gb/s.
Which cable should the architect use?
- A. Active Twinax cable.
- B. Passive Twinax cable.
- C. Shielded ethernet cable. ***
- D. Fiber optic cable.
Answer: C
NEW QUESTION 33
A customer has an existing Flashblade with 13x52TB blades in a single-chassis configuration and needs more capacity for a new application coming online in the next few weeks. The architect has determined they need an additional four blades.
How many additional rack units are required to accommodate the new blades?
- A. 0
- B. 1
- C. 2
- D. 4 ***
Answer: D
NEW QUESTION 34
A customer has a 7x52TB system and reports poor workload performance.
The customer provides the following information:
1.The customer has 4 host connecting using NFS.
2.The environment is running VMware with 300 VMs.
3.The FlashBlade is connected to the customer network using 4x40Gb/s links What is causing this issue?
- A. The customer must configure and optimal I/O size for the file system.
- B. The environment does NOT have enough concurrency to the FlashBlade.
- C. The customer must buy more blade to improve performance. ***
- D. The environment does NOT have properly configured jumbo frames.
Answer: C
NEW QUESTION 35
A customer's application runs slowly on their HDFS cluster. The customer is only using a small subset of the data on the cluster.
What is causing the issue?
- A. Data Availability ***
- B. Data Locality
- C. Data Efficiency
- D. Data Consistency
Answer: A
NEW QUESTION 36
A customer is using the FlashBlade as an image database backup/restore target. The dataset that they are backing up is 100TB. The customer has a 5-day snapshot retention policy, and an average of 50TB of data change from day to day.
Which factor will alter the physical datasize?
- A. RAID Overhead
- B. Snapshot Retention
- C. Erasure Coding
- D. Write Size ***
Answer: C
NEW QUESTION 37 
What are Port 31/32 on the XFMs reserved for?
- A. FlashBlade Chassis
- B. Customer Network
- C. Switch interconnectivity ***
- D. Console
Answer: C
NEW QUESTION 38
A customer wants to deploy AI/ML using Pure Storage AIRI reference architecture.
Which model should the architect use to meet the requirements?
- A. An architecture that is made up of 4xDGX-1 servers, 2xArista 7060x switches, and FlashBlade single chassis ***
- B. An architecture that is made up of 4xDGX-1 servers, FlashBlade XFM, and FlashBlade single chassis.
- C. An architecture that is made up of 4xUCS X220 servers, 2xCisco Nexus 9000 switches, and FlashBlade single chassis
- D. An architecture that is made up of 4xDGX-1 servers, 2xArista 7060x switches, and FlashArray //X70
Answer: A
NEW QUESTION 39
A customer has an application that needs to prioritize speed for untrusted applications to put large numbers of files on an NFS export. Which NFS Export options should be used?
- A. *(ro, sync, no_root_squash)
- B. *(rw, async, root_squash)
- C. *(ro, async, root_squash)
- D. *(rw, sync, root_squash) ***
Answer: D
NEW QUESTION 40
An HPC environment has the following:
-100 physical hosts, each with a single 10GbE NIC, and a single NFS mount point to the FlashBlade.
-A 7x52TB FlashBlade, connected to the Top-of-Rack switches via eight 40GbE connections.
What is the maximum aggregate write throughput the customer should expect from the FlashBlade?
- A. Approximately 4.2 GB/s
- B. Approximately 7 GB/s
- C. Approximately 2.1 GB/s ***
- D. Approximately 4 GB/s
Answer: C
NEW QUESTION 41
A customer is developing a AI workflow that Ingests sensor data to FlashBlade NFS from its cloud edge collection point for furthers analysis.
The customer's HPC cluster mounts NFS to train the data but S3 to label.
Which challenge will the architect experience with this design?
- A. NFS and S3 cannot be enabled concurrently.
- B. NFS and S3 are NOT a shared namespace. ***
- C. NFS and S3 must use different data VIPs.
- D. NFS and S3 cannot share export rules.
Answer: C
NEW QUESTION 42 
The customer provides the network diagram shown. The customer wants to use RBAC and SMB on the FlashBlade. The customer does NOT use encryption for identity-related traffic.
Which ports must be opened for this to work?
- A. Port 123 on Firewalls A and C
Ports 445 and 636 on Firewall B - B. Ports 53 and 2049 on Firewalls A and B
Ports 53 and 389 on Firewall C - C. Ports 123, 445, and 636 on Firewalls A and B
Port 445 on Firewall B - D. Ports 53, 389, and 445 on Firewalls A and C
Ports 53 and 445 on Firewall B ***
Answer: D
NEW QUESTION 43
Which two network configurations must be present for FlashBlade to server data? (Select two.)
- A. LAG(s) ***
- B. A reachable SMTP server
- C. Duplex set to Auto
- D. Active/active port-channel ***
- E. A reachable SNMP server
Answer: A,D
NEW QUESTION 44
......
Pure Storage FBAP_002 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Best updated resource for FBAP_002 Online Practice Exam: https://examcollection.vcetorrent.com/FBAP_002-valid-vce-torrent.html