Get JN0-363 Braindumps & JN0-363 Real Exam Questions
Juniper JN0-363 Actual Questions and Braindumps
The JN0-363 exam covers a range of topics, including OSPF, BGP, MPLS, Layer 2 VPNs, and Layer 3 VPNs. The exam also tests the candidate's knowledge of Juniper Networks equipment, including routers and switches. Candidates must have a strong understanding of these topics in order to pass the exam and earn their certification.
The JN0-363 exam is intended to test the knowledge and skills of candidates in areas such as BGP, OSPF, IS-IS, MPLS, Layer 2 VPNs, Layer 3 VPNs, and other related topics. The exam is not easy, and it requires a significant amount of preparation and study time to pass successfully.
To prepare for the JN0-363 exam, candidates should have a strong foundation in networking and routing and switching concepts. They should also have experience working with Juniper Networks products and technologies in a service provider environment. There are a variety of resources available to help candidates prepare for the exam, including training courses, study guides, and practice exams. With the right preparation and experience, candidates can successfully earn the JN0-363 certification and demonstrate their expertise in service provider routing and switching.
NEW QUESTION # 51
Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?
- A. 192.168.1.3
- B. 172.18.1.0/24
- C. 172.26.4.0730
- D. 192.108.1.4
Answer: C
NEW QUESTION # 52
The IPv6 Neighbor Discovery Protocol (NDP) performs the same function as which two IPv4 protocols? (Choose two.)
- A. DNS
- B. ICMP
- C. ARP
- D. DHCP
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ipv6-neighbor-discovery.html#:~:text=Neighbor%20discovery%20for%20IPv6%
20replaces,Discovery%20protocol%20(NDP)%20messages.
NEW QUESTION # 53
Which type of load balancing is shown in the exhibit?
- A. elastic load balancing
- B. per-packet load balancing
- C. per-flow load balancing
- D. network load balancing
Answer: D
NEW QUESTION # 54
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.
What is the result of applying this policy?
- A. The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
- B. The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.
- C. The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
- D. The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
Answer: C
NEW QUESTION # 55
Click the Exhibit button.
You are asked to configure OSPF for the network?
Referring to the exhibit, how should Area 1 be configured?
- A. backbone area
- B. stub area
- C. not-so-stubby area
- D. totally stubby area
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html
NEW QUESTION # 56
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
- A. the link-local address
- B. the statically assigned address
- C. the loopback address
- D. the multicast address
Answer: A
NEW QUESTION # 57
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?
- A. The command will install the prefix in inet.3 rather than inet.0
- B. The command will install the prefix in inet.0 rather than inet.3
- C. The command will swap the prefix from inet.0 to inet.3
- D. The command will swap the prefix from inet.3 to inet.0
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214
NEW QUESTION # 58
You are advertising a summary route that represents your local network (172.20.0.0716) to both ISP A and ISPB. You want to influence all traffic sent to you from ISP C to go through R2.
How would you accomplish this task?
- A. On R2, change the local preference value to 50.
- B. On R1, change the local preference value to 250.
- C. On R1, prepend your AS number three times on the 172.20.0.0/16 route when advertising It to ISP 1.
- D. On R2. prepend your AS number three times on the 172.20.0.0/16 route when advertising it to ISP 2.
Answer: B
NEW QUESTION # 59
Click the Exhibit button.
Referring to the exhibit, which statement about the IS-IS interface is true?
- A. The ge-0/0/0.0 interface will not be assigned to a level
- B. The ge-0/0/0.0 interface will act as an L1 interface only
- C. The ge-0/0/0.0 interface will act as an L2 interface only
- D. The ge-0/0/0.0 interface will act as an L1/L2 interface
Answer: D
NEW QUESTION # 60
Exhibit
You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)
- A. Apply the touting policy on R1 as an Import policy to the IBGP group.
- B. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for IBGP peering.
- C. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for EBGP peering.
- D. Apply the routing policy on R1 as an export policy to the IBGP group.
Answer: B,C
NEW QUESTION # 61
What are two valid next-hop types that would be configured for a static route? (Choose two.)
- A. A MAC address
- B. An igress interface name
- C. An egress interface name
- D. An IP address
Answer: C,D
NEW QUESTION # 62
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to mark the tunnel down after the hold-time expires
- B. to remove the tunnel interface from inet.0 after the hold-time expires
- C. to mark the tunnel up after the hold-time expires
- D. to reduce the risk of forwarding traffic through a stateless tunnel
Answer: A,D
NEW QUESTION # 63
Exhibit
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Prefixes in Level 1 will not be redistributed to Level 2.
- B. Prefixes in Level 1 will be redistributed to Level 2.
- C. Prefixes in Level 2 will be redistributed to Level 1.
- D. Prefixes In Level 2 will be not redistributed to Level 1.
Answer: C
NEW QUESTION # 64
Exhibit
The LSP is not establishing correctly.
Referring to the exhibit, what should you do to solve the problem?
- A. Enable traffic engineering for the IS-IS protocol.
- B. Enable traffic engineering for the RSVP protocol.
- C. Enable traffic engineering for the OSPF protocol.
- D. Enable traffic engineering for the BGP protocol.
Answer: B
NEW QUESTION # 65
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?
- A. The update messages contain an unsupported option
- B. The peer's AS number is misconfigured
- C. The TCP session is not establishing
- D. The neighbor does not support IPv6
Answer: B
NEW QUESTION # 66
......
JN0-363 Dumps To Pass Juniper Exam in 24 Hours - VCETorrent: https://examcollection.vcetorrent.com/JN0-363-valid-vce-torrent.html