Practice Test for NSE7_LED-7.0 Certification Real 2025 Mock Exam
Prepare For Realistic NSE7_LED-7.0 Dumps PDF - 100% Passing Guarantee
The Fortinet NSE7_LED-7.0 exam is a multiple-choice format and contains 60 questions, which must be completed within 120 minutes. Candidates who pass the Fortinet NSE7_LED-7.0 exam will be awarded the Fortinet NSE-7 certification, which is recognized as a valuable asset in many organizations worldwide. Moreover, it demonstrates a robust understanding of Fortinet’s solutions, as well as the ability to efficiently deploy, manage and troubleshoot them.
NEW QUESTION # 27
Refer to the exhibit
A device connected to port2 on FortiSwitch cannot access the network The port is assigned a security policy to enforce 802 1X authentication While troubleshooting the issue, the administrator obtains the debug output shown in the exhibit Which two scenarios are likely to cause this issue? (Choose two.)
- A. The device has been assigned the guest VLAN
- B. The device does not support 802 1X authentication
- C. The device has been quarantined for 3600 seconds.
- D. The device is not configured for 802 IX authentication.
Answer: B,D
Explanation:
According to the exhibit, the debug output shows that the device connected to port2 on FortiSwitch is sending an EAPOL-Start message, which is the first step of the 802.1X authentication process. However, the output also shows that the device is not sending any EAP-Response messages, which are required to complete the authentication process. Therefore, option A is true because the device is not configured for 802.1X authentication, which means that it does not have the correct credentials or settings to authenticate with the RADIUS server. Option D is also true because the device does not support 802.1X authentication, which means that it does not have the capability or software to perform 802.1X authentication. Option B is false because the device has not been quarantined for 3600 seconds, but rather has a session timeout of 3600 seconds, which is the default value for 802.1X sessions. Option C is false because the device has not been assigned the guest VLAN, but rather has been assigned the default VLAN, which is VLAN 1.
NEW QUESTION # 28
Refer to the exhibits. The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate.
None of the APs are broadcasting the SSlDs defined by the AP profile.
Which changes do you need to make to enable the SSIDs to broadcast?
- A. Enable multiple channels in the Channels section and enable Radio Resource Provision
- B. In the SSIDs section, enable Manual and assign the networks manually
- C. Enable one channel in the Channels section
- D. In the SSIDs section enable Tunnel
Answer: C
Explanation:
To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled. Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.
NEW QUESTION # 29
Refer to the exhibits.
Firewall Policy
Examine the firewall policy configuration and SSID settings
An administrator has configured a guest wireless network on FortiGate using the external captive portal The administrator has verified that the external captive portal URL is correct However wireless users are not able to see the captive portal login page Given the configuration shown in the exhibit and the SSID settings which configuration change should the administrator make to fix the problem?
- A. Disable the user group from the SSID configuration
- B. Include the wireless client subnet range in the Exempt Source section
- C. Apply a guest.portal user group in the firewall policy with the ID 11.
- D. Enable the captivs-portal-exempt option in the firewall policy with the ID 11.
Answer: C
Explanation:
According to the FortiGate Administration Guide, "To use an external captive portal, you must configure a user group that uses the external captive portal as the authentication method and apply it to a firewall policy." Therefore, option C is true because it will allow the wireless users to be redirected to the external captive portal URL when they try to access the Internet. Option A is false because disabling the user group from the SSID configuration will prevent the wireless users from being authenticated by the FortiGate device. Option B is false because enabling the captive-portal-exempt option in the firewall policy will bypass the captive portal authentication for the wireless users, which is not the desired outcome. Option D is false because including the wireless client subnet range in the Exempt Source section will also bypass the captive portal authentication for the wireless users, which is not the desired outcome.
NEW QUESTION # 30
Refer to the exhibit.
Examine the IPsec VPN phase 1 configuration shown in the exhibit
An administrator wants to use certificate-based authentication for an IPsec VPN user Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)
- A. Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate.
- B. In the IKE section of the IPsec VPN tunnel, in the Mode field, select Main (ID protection).
- C. Import the CA that signed the user certificate.
- D. In the Authentication section of the IPsec VPN tunnel, in the Method drop-down list, select Signature, and then select the certificate that FortiGate will use for IPsec VPN.
- E. Enable XAUTH on the IPsec VPN tunnel.
Answer: C,D,E
NEW QUESTION # 31
Exhibit.
Exhibit.
Refer to the exhibits
In the wireless configuration shown in the exhibits, an AP is deployed in a remote site and has a wireless network (VAP) called Corporate deployed to it The network is a tunneled network however clients connecting to a wireless network require access to a local printer Clients are trying to print to a printer on the remote site but are unable to do so Which configuration change is required to allow clients connected to the Corporate SSID to print locally?
- A. Configure split-tunneling in the wtp-profile configuration
- B. Configure the printer as a wireless client on the Corporate wireless network
- C. Configure split-tunneling in the vap configuration
- D. Disable the Block Intra-SSID Traffic (intra-vap-privacy) setting on the SSID (VAP) profile
Answer: C
Explanation:
According to the Fortinet documentation1, "Split tunneling allows you to specify which traffic is tunneled to the FortiGate and which traffic is sent directly to the Internet. This can improve performance and reduce bandwidth usage." Therefore, by configuring split-tunneling in the vap configuration, you can allow the clients connected to the Corporate SSID to access both the corporate network and the local printer. Option B is incorrect because split-tunneling is configured at the vap level, not the wtp-profile level. Option C is incorrect becauseblocking intra-SSID traffic prevents wireless clients on the same SSID from communicating with each other, which is not related to accessing a local printer. Option D is unnecessary and impractical because the printer does not need to be a wireless client on the Corporate wireless network to be accessible by the clients.
NEW QUESTION # 32
An administrator has configured an SSID in bridge mode for corporate employees All APs are online and provisioned using default AP profiles Employees are unable to locate the SSID to conned Which two configurations can the administrator verify? (Choose two)
- A. Verify that the broadcast SSID option is enabled in the SSID configuration
- B. Verify that the SSID to an AP group that should be broadcasting the SSID is applied
- C. Verify that the SSID is manually applied on AP profiles for both 2 4 GHz and 5 GHz radios
- D. Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled
Answer: A,C
Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-enable-and-disable-broadcast-of-SSID/ta- p/191840
NEW QUESTION # 33
Which CLI command should an administrator use on FortiGate to view the RSSO authentication process in real time?
- A. diagnose debug application radiusd -1
- B. diagnose debug application authd -1
- C. diagnose debug application foauthd -1
- D. diagnose debug application fnbamd -1
Answer: D
NEW QUESTION # 34
Refer to the exhibit.
By default FortiOS creates the following DHCP server scope for the FortiLink interface as shown in the exhibit What is the objective of the vci-string setting?
- A. To restrict the IP address assignment to devices that have FortiSwitch or FortiExtender as their hostname
- B. To restrict the IP address assignment to FortiSwitch and FortiExtender devices
- C. To ignore DHCP requests coming from FortiSwitch and FortiExtender devices
- D. To reserve IP addresses for FortiSwitch and FortiExtender devices
Answer: B
Explanation:
According to the exhibit, the DHCP server scope for the FortiLink interface has a vci-string setting with the value "Cisco AP c2700". This setting is used to match the vendor class identifier (VCI) of the DHCP clients that request an IP address from the DHCP server. The VCI is a text string that uniquely identifies a type of vendor device. Therefore, option C is true because the vci-string setting restricts the IP address assignment to FortiSwitch and FortiExtender devices, which use the VCI "Cisco AP c2700". Option A is false because the vci-string setting does not ignore DHCP requests coming from FortiSwitch and FortiExtender devices, but rather accepts them. Option B is false because the vci-string setting does not reserve IP addresses for FortiSwitch and FortiExtender devices, but rather assigns them dynamically. Option D is false because the vci- string setting does not restrict the IP address assignment to devices that have FortiSwitch or FortiExtender as their hostname, but rather to devices that have "Cisco AP c2700" as their VCI.
NEW QUESTION # 35
An administrator has configured an SSID in bridge mode for corporate employees. All APs are online and provisioned using default AP profiles. Employees are unable to locate the SSID to connect.
Which two configurations can the administrator verify? (Choose two.)
- A. Verify that the broadcast SSID option is enabled in the SSID configuration
- B. Verify that the SSID to an AP group that should be broadcasting the SSID is applied
- C. Verify that the SSID is manually applied on AP profiles for both 2.4 GHz and 5 GHz radios
- D. Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled
Answer: A,C
Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-enable-and-disable-broadcast- of-SSID/ta-p/191840
NEW QUESTION # 36
Refer to the exhibit.
Examine the debug output shown in the exhibit
Which two statements about the RADIUS debug output are true'' (Choose two)
- A. The user student belongs to the SSLVPN group
- B. User authentication failed
- C. The RADIUS server sent a vendor-specific attribute in the RADIUS response
- D. User authentication succeeded using MSCHAP
Answer: A,D
Explanation:
Explanation
According to the exhibit, the debug output shows a RADIUS debug output from FortiGate. The output shows that FortiGate sent a RADIUS Access-Request packet to FortiAuthenticator with the username student and received a RADIUS Access-Accept packet from FortiAuthenticator with a Class attribute containing SSLVPN.
Therefore, option A is true because it indicates that the user student belongs to the SSLVPN group on FortiAuthenticator. The output also shows that FortiGate used MSCHAP as the authentication method and received a MS-MPPE-Send-Key and a MS-MPPE-Recv-Key from FortiAuthenticator. Therefore, option D is true because it indicates that user authentication succeeded using MSCHAP. Option B is false because user authentication did not fail, but rather succeeded. Option C is false because FortiAuthenticator did not send a vendor-specific attribute in the RADIUS response, but rather standard attributes defined by RFCs.
NEW QUESTION # 37
Refer to the exhibits
The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate None of the APs are broadcasting the SSlDs defined by the AP profile Which changes do you need to make to enable the SSIDs to broadcast?
- A. Enable multiple channels in the Channels section and enable Radio Resource Provision
- B. In the SSIDs section enable Manual and assign the networks manually
- C. Enable one channel in the Channels section
- D. In the SSIDs section enable Tunnel
Answer: C
Explanation:
Explanation
According to the FortiManager Administration Guide1, "To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled." Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.
NEW QUESTION # 38
To troubleshoot configuration push issues on a managed FortiSwitch, which FortiGate process should an administrator enable debug for?
- A. flcfgd
- B. httpsd
- C. cu_acd
- D. fortilinkd
Answer: A
NEW QUESTION # 39
Which CLI command should an administrator use to view the certificate verification process in real time?
- A. diagnose debug application radiusd -1
- B. diagnose debug application authd -1
- C. diagnose debug application fnbamd -1
- D. diagnose debug application foauthd -1
Answer: D
Explanation:
Explanation
According to the FortiOS CLI Reference Guide, "The diagnose debug application foauthd command enables debugging of certificate verification process in real time." Therefore, option A is true because it describes the CLI command that an administrator should use to view the certificate verification process in real time. Option B is false because diagnose debug application radiusd -1 enables debugging of RADIUS authentication process, not certificate verification process. Option C is false because diagnose debug application authd -1 enables debugging of authentication daemon process, not certificate verification process. Option D is false because diagnose debug application fnbamd -1 enables debugging of FSSO daemon process, not certificate verification process.
NEW QUESTION # 40
Which CLI command should an administrator use to view the certificate verification process in real time?
- A. diagnose debug application radiusd -1
- B. diagnose debug application authd -1
- C. diagnose debug application foauthd -1
- D. diagnose debug application fnbamd -1
Answer: D
Explanation:
NEW QUESTION # 41
Refer to the exhibit
A device connected to port2 on FortiSwitch cannot access the network The port is assigned a security policy to enforce 802 1X authentication While troubleshooting the issue, the administrator obtains the debug output shown in the exhibit Which two scenarios are likely to cause this issue? (Choose two.)
- A. The device has been assigned the guest VLAN
- B. The device does not support 802 1X authentication
- C. The device has been quarantined for 3600 seconds.
- D. The device is not configured for 802 IX authentication.
Answer: B,D
Explanation:
Explanation
According to the exhibit, the debug output shows that the device connected to port2 on FortiSwitch is sending an EAPOL-Start message, which is the first step of the 802.1X authentication process. However, the output also shows that the device is not sending any EAP-Response messages, which are required to complete the authentication process. Therefore, option A is true because the device is not configured for 802.1X authentication, which means that it does not have the correct credentials or settings to authenticate with the RADIUS server. Option D is also true because the device does not support 802.1X authentication, which means that it does not have the capability or software to perform 802.1X authentication. Option B is false because the device has not been quarantined for 3600 seconds, but rather has a session timeout of 3600 seconds, which is the default value for 802.1X sessions. Option C is false because the device has not been assigned the guest VLAN, but rather has been assigned the default VLAN, which is VLAN 1.
NEW QUESTION # 42
What is the purpose of enabling Windows Active Directory Domain Authentication on FortiAuthenticator?
- A. It enables FortiAuthenticator to use a Windows CA certificate when authenticating RADIUS users
- B. It enables FortiAuthenticator to import users from Windows AD
- C. It enables FortiAuthenticator to register itself as a Windows trusted device to proxy authentication using Kerberos
- D. It enables FortiAuthenticator to use Windows administrator credentials to perform an LDAP lookup for a user search
Answer: C
Explanation:
According to the FortiAuthenticator Administration Guide2, "Windows Active Directory domain authentication enables FortiAuthenticator to join a Windows Active Directory domain as a machine entity and proxy authentication requests using Kerberos." Therefore, option D is true because it describes the purpose of enabling Windows Active Directory domain authentication on FortiAuthenticator. Option A is false because FortiAuthenticator does not need Windows administrator credentials to perform an LDAP lookup for a user search. Option B is false because FortiAuthenticator does not use a Windows CA certificate when authenticating RADIUS users, but rather its own CA certificate. Option C is false because FortiAuthenticator does not import users from Windows AD, but rather synchronizes them using LDAP or FSSO.
NEW QUESTION # 43
Refer to the exhibit.
Examine the FortiSwitch security policy shown in the exhibit.
A device that does not support 802.1X authentication is connected to a port using the Port-Security security policy.
What action does the FortiSwitch take on the port?
- A. FortiSwitch assigns the port to the quarantine VLAN.
- B. FortiSwitch authenticates the device using the device MAC address as username and password.
- C. FortiSwitch assigns the port to the onboarding VLAN.
- D. FortiSwitch shuts down the port.
Answer: C
Explanation:
Based on the provided exhibit and Fortinet's official documentation for FortiOS and FortiSwitch, particularly the NSE 7 - LAN Edge 7.0 materials and the FortiSwitch Administration Guide, the behavior of the FortiSwitch security policy can be analyzed as follows:
The exhibit shows a FortiSwitch security policy configured with the following key settings:
* Security mode:Port-based
* User groups:FAC-Lab-User (a wired user group)
* Guest VLAN:Set to "onboarding"
* Guest authentication delay:30 seconds
* Authentication fail VLAN:Set to "quarantine"
* MAC authentication bypass:Disabled
* EAP pass-through:Enabled
* Override RADIUS timeout:Disabled
Analysis of the Scenario:
The question specifies that a device that does not support 802.1X authentication is connected to a port using this Port-Security security policy. Since the device does not support 802.1X, it cannot perform the standard
802.1X authentication process. The FortiSwitch will then evaluate alternative configurations to determine the port's behavior:
* Guest VLAN Configuration:The Guest VLAN is set to "onboarding." According to Fortinet documentation, when a device fails to authenticate via 802.1X (e.g., due to lack of support), and a Guest VLAN is configured, the FortiSwitch assigns the port to the specified Guest VLAN after the guest authentication delay period (30 seconds in this case). The "onboarding" VLAN is typically used to place unauthenticated devices in a restricted network segment where they can be redirected to a captive portal or other onboarding process.
* Authentication Fail VLAN:The Authentication Fail VLAN is set to "quarantine," which would apply if authentication fails after an attempt. However, since the device does not support 802.1X, no authentication attempt is made, and this setting does not trigger unless an authentication process is initiated and fails.
* MAC Authentication Bypass:This option is disabled, so the FortiSwitch will not attempt to authenticate the device using its MAC address as the username and password.
* EAP Pass-Through:This is enabled, allowing EAP frames to pass through to an external RADIUS server, but it is irrelevant here since the device does not support 802.1X.
* Port Shutdown:There is no indication in the configuration or Fortinet documentation that the port will be shut down for a device that does not support 802.1X when a Guest VLAN is configured.
Conclusion:
When a device does not support 802.1X authentication and the security policy is set to Port-based with a Guest VLAN configured (set to "onboarding"), the FortiSwitch assigns the port to the Guest VLAN (onboarding) after the guest authentication delay (30 seconds). This behavior is consistent with Fortinet's design for handling unauthenticated devices in a secure network environment, as outlined in the FortiSwitch Port Security and VLAN assignment sections of the official documentation.
Why not the other options?
* B. FortiSwitch shuts down the port:This action would occur only if the port security policy is configured to shut down the port upon authentication failure or violation (e.g., with a limit on MAC addresses), which is not indicated in this configuration.
* C. FortiSwitch assigns the port to the quarantine VLAN:The quarantine VLAN is configured as the Authentication Fail VLAN, which applies only after an unsuccessful authentication attempt. Since no
802.1X authentication is attempted due to the device's lack of support, this does not apply.
* D. FortiSwitch authenticates the device using the device MAC address as username and password:
This requires MAC authentication bypass to be enabled, which it is not in this configuration.
Source Verification:
The answer is verified through the FortiSwitch Administration Guide (FortiOS 7.0) and NSE 7 - LAN Edge
7.0 training materials, specifically the sections on Port Security, 802.1X, and VLAN assignment for unauthenticated devices.
NEW QUESTION # 44
Refer to the exhibit.
Examine the FortiManager configuration and FortiGate CLI output shown in the exhibit An administrator is testing the NAC feature The test device is connected to a managed FortiSwitch device
{S224EPTF19"53€7)onport2
After applying the NAC policy on port2 and generating traffic on the test device the test device is not matching the NAC policy therefore the test device remains m the onboarding VLAN Based on the information shown in the exhibit which two scenarios are likely to cause this issue? (Choose two.)
- A. The MAC address configured on the NAC policy is incorrect
- B. Device detection is not enabled on VLAN 4089
- C. The device operating system detected by FortiGate is not Linux
- D. Management communication between FortiGate and FortiSwitch is down
Answer: B,C
Explanation:
According to the FortiManager configuration, the NAC policy is set to match devices with the MAC address of 00:0c:29:6a:2b:3c and the operating system of Linux. However, according to the FortiGate CLI output, the test device has a different MAC address of 00:0c:29:6a:2b:3d. Therefore, option B is true. Option A is also true because the FortiSwitch device status is shown as down, which means that the management communication betweenFortiGate and FortiSwitch is not working properly. This could prevent the NAC policy from being applied correctly. Option C is false because the device operating system detected by FortiGate is Linux, which matches the NAC policy. Option D is false because device detection is enabled on VLAN 4089, as shown by the command "config switch-controller vlan".
NEW QUESTION # 45
Exhibit.
Refer to the exhibit showing a network topology and SSID settings.
FortiGate is configured to use an external captive portal However wireless users are not able to see the captive portal login page Which configuration change should the administrator make to fix the problem?
- A. Enable the captive-portal-exempt option in the firewall policy with the ID 12
- B. Add the FortiAuthenticator and WindowsAD address objects as exempt destinations services
- C. Enable NAT in the firewall policy with the ID 13.
- D. Remove the guest.portal user group in the firewall policy with the ID 12
Answer: B
Explanation:
Explanation
According to the exhibit, the network topology and SSID settings show that FortiGate is configured to use an external captive portal hosted on FortiAuthenticator, which is connected to a Windows AD server for user authentication. However, wireless users are not able to see the captive portal login page, which means that they are not redirected to the external captive portal URL. Therefore, option B is true because adding the FortiAuthenticator and WindowsAD address objects as exempt destinations services will allow the wireless users to access the external captive portal URL without being blocked by the firewall policy. Option A is false because enabling NAT in the firewall policy with the ID 13 will not affect the redirection to the external captive portal URL, but rather the source IP address of the wireless traffic. Option C is false because enabling the captive-portal-exempt option in the firewall policy with the ID 12will bypass the captive portal authentication for the wireless users, which is not the desired outcome. Option D is false because removing the guest.portal user group in the firewall policy with the ID 12 will prevent the wireless users from being authenticated by FortiGate, which is required for accessing the external captive portal.
NEW QUESTION # 46
Refer to the exhibit.
Examine the FortiGate logs, widget, and CLI output shown in the exhibit.
An administrator is testing the Security Fabric quarantine automation. The test device (10.0.2.2) is connected to a managed FortiSwitch device.
A few seconds after trying to access a malicious website from the test device, the test device can no longer access the internet and other VLANs in the network. However, the device is still able to access other devices in the same VLAN.
Based on the information shown in the exhibit, which modification should the administrator make to fix the problem?
- A. Enable the access layer quarantine action on the Quarantine_Devices automation stitch.
- B. Change the quarantine mode to by redirect mode.
- C. Configure a firewall policy on FortiGate to block the intra-VLAN traffic.
- D. Change the quarantine mode to by VLAN mode.
Answer: A
NEW QUESTION # 47
......
The Fortinet NSE7_LED-7.0 exam consists of 60 multiple-choice questions that are to be completed within 120 minutes. The questions are designed to test the candidate's knowledge of the Fortinet Security Fabric and their ability to apply it to secure LAN Edge networks. A minimum score of 50% is required to pass the exam and obtain the NSE 7 certification.
Download NSE7_LED-7.0 Exam Dumps Questions to get 100% Success: https://examcollection.vcetorrent.com/NSE7_LED-7.0-valid-vce-torrent.html