Start your PCEP-30-02 Exam Questions Preparation with Updated 30 Questions
A Fully Updated 2023 PCEP-30-02 Exam Dumps - PDF Questions and Testing Engine
NEW QUESTION # 12
Arrange the binary numeric operators in the order which reflects their priorities, where the top-most position has the highest priority and the bottom-most position has the lowest priority.
Answer:
Explanation:
Explanation
The correct order of the binary numeric operators in Python according to their priorities is:
Exponentiation (**)
Multiplication (*) and Division (
Addition (+) and Subtraction (
This order follows the standard mathematical convention of operator precedence, which can be remembered by the acronym PEMDAS (Parentheses, Exponents, Multiplication/Division, Addition/Subtraction). Operators with higher precedence are evaluated before those with lower precedence, but operators with the same precedence are evaluated from left to right. Parentheses can be used to change the order of evaluation by grouping expressions.
For example, in the expression 2 + 3 * 4 ** 2, the exponentiation operator (**) has the highest priority, so it is evaluated first, resulting in 2 + 3 * 16. Then, the multiplication operator (*) has the next highest priority, so it is evaluated next, resulting in 2 + 48. Finally, the addition operator (+) has the lowest priority, so it is evaluated last, resulting in 50.
You can find more information about the operator precedence in Python in the following references:
6. Expressions - Python 3.11.5 documentation
Precedence and Associativity of Operators in Python - Programiz
Python Operator Priority or Precedence Examples Tutorial
NEW QUESTION # 13
What is the expected output of the following code?
- A. 0
- B. 1
- C. The code outputs nothing.
- D. 2
Answer: D
Explanation:
Explanation
The code snippet that you have sent is checking if two numbers are equal and printing the result. The code is as follows:
num1 = 1 num2 = 2 if num1 == num2: print(4) else: print(1)
The code starts with assigning the values 1 and 2 to the variables "num1" and "num2" respectively. Then, it enters an if statement that compares the values of "num1" and "num2" using the equality operator (==). If the values are equal, the code prints 4 to the screen. If the values are not equal, the code prints 1 to the screen.
The expected output of the code is 1, because the values of "num1" and "num2" are not equal. Therefore, the correct answer is C. 1.
NEW QUESTION # 14
What is the expected output of the following code?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
The code snippet that you have sent is using the count method to count the number of occurrences of a value in a list. The code is as follows:
my_list = [1, 2, 3, 4, 5] print(my_list.count(1))
The code starts with creating a list called "my_list" that contains the numbers 1, 2, 3, 4, and 5. Then, it uses the print function to display the result of calling the count method on the list with the argument 1. The count method is used to return the number of times a value appears in a list. For example, my_list.count(1) returns 1, because 1 appears once in the list.
The expected output of the code is 1, because the code prints the number of occurrences of 1 in the list.
Therefore, the correct answer is D. 1.
NEW QUESTION # 15
Python Is an example of which programming language category?
- A. assembly
- B. compiled
- C. interpreted
- D. machine
Answer: C
Explanation:
Explanation
Python is an interpreted programming language, which means that the source code is translated into executable code by an interpreter at runtime, rather than by a compiler beforehand. Interpreted languages are more flexible and portable than compiled languages, but they are also slower and less efficient. Assembly and machine languages are low-level languages that are directly executed by the hardware, while compiled languages are high-level languages that are translated into machine code by a compiler before execution.
NEW QUESTION # 16
What happens when the user runs the following code?
- A. The program outputs five asterisks ( ***** ) to the screen.
- B. The program outputs one asterisk ( * ) to the screen.
- C. The program enters an infinite loop.
- D. The program outputs three asterisks ( *** )to the screen.
Answer: C
Explanation:
Explanation
The code snippet that you have sent is a while loop with an if statement and a print statement inside it. The code is as follows:
while True: if counter < 0: print("") else: print("**")
The code starts with entering a while loop that repeats indefinitely, because the condition "True" is always true. Inside the loop, the code checks if the value of "counter" is less than 0. If yes, it prints a single asterisk () to the screen. If no, it prints three asterisks (**) to the screen. However, the code does not change the value of
"counter" inside the loop, so the same condition is checked over and over again. The loop never ends, and the code enters an infinite loop.
The program outputs either one asterisk () or three asterisks (**) to the screen repeatedly, depending on the initial value of "counter". Therefore, the correct answer is D. The program enters an infinite loop.
NEW QUESTION # 17
Which of the following functions can be invoked with two arguments?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Explanation
The code snippets that you have sent are defining four different functions in Python. A function is a block of code that performs a specific task and can be reused in the program. A function can take zero or more arguments, which are values that are passed to the function when it is called. A function can also return a value or None, which is the default return value in Python.
To define a function in Python, you use the def keyword, followed by the name of the function and parentheses. Inside the parentheses, you can specify the names of the parameters that the function will accept.
After the parentheses, you use a colon and then indent the code block that contains the statements of the function. For example:
def function_name(parameter1, parameter2): # statements of the function return value To call a function in Python, you use the name of the function followed by parentheses. Inside the parentheses, you can pass the values for the arguments that the function expects. The number and order of the arguments must match the number and order of the parameters in the function definition, unless you use keyword arguments or default values. For example:
function_name(argument1, argument2)
The code snippets that you have sent are as follows:
A) def my_function(): print("Hello")
B) def my_function(a, b): return a + b
C) def my_function(a, b, c): return a * b * c
D) def my_function(a, b=0): return a - b
The question is asking which of these functions can be invoked with two arguments. This means that the function must have two parameters in its definition, or one parameter with a default value and one without.
The default value is a value that is assigned to a parameter if no argument is given for it when the function is called. For example, in option D, the parameter b has a default value of 0, so the function can be called with one or two arguments.
The only option that meets this criterion is option B. The function in option B has two parameters, a and b, and returns the sum of them. This function can be invoked with two arguments, such as my_function(2, 3), which will return 5.
The other options cannot be invoked with two arguments. Option A has no parameters, so it can only be called with no arguments, such as my_function(), which will print "Hello". Option C has three parameters, a, b, and c, and returns the product of them. This function can only be called with three arguments, such as my_function(2, 3, 4), which will return 24. Option D has one parameter with a default value, b, and one without, a, and returns the difference of them. This function can be called with one or two arguments, such as my_function(2) or my_function(2, 3), which will return 2 or -1, respectively.
Therefore, the correct answer is B. Option B.
NEW QUESTION # 18
What is the expected result of running the following code?
- A. The code prints 0
- B. The code raises an unhandled exception.
- C. The code prints 2
- D. The code prints 1 .
Answer: B
Explanation:
Explanation
The code snippet that you have sent is trying to use the index method to find the position of a value in a list.
The code is as follows:
the_list = [1, 2, 3, 4, 5] print(the_list.index(6))
The code starts with creating a list called "the_list" that contains the numbers 1, 2, 3, 4, and 5. Then, it tries to print the result of calling the index method on the list with the argument 6. The index method is used to return the first occurrence of a value in a list. For example, the_list.index(1) returns 0, because 1 is the first value in the list.
However, the code has a problem. The problem is that the value 6 is not present in the list, so the index method cannot find it. This will cause a ValueError exception, which is an error that occurs when a function or operation receives an argument that has the right type but an inappropriate value. The code does not handle the exception, and therefore it will terminate with an error message.
The expected result of the code is an unhandled exception, because the code tries to find a value that does not exist in the list. Therefore, the correct answer is C. The code raises an unhandled exception.
NEW QUESTION # 19
Drag and drop the code boxes in order to build a program which prints Unavailable to the screen.
(Note: one code box will not be used.)
Answer:
Explanation:
NEW QUESTION # 20
Arrange the code boxes in the correct positions to form a conditional instruction which guarantees that a certain statement is executed when the speed variable is less than 50.0.
Answer:
Explanation:
Explanation
One possible way to arrange the code boxes in the correct positions to form a conditional instruction which guarantees that a certain statement is executed when the speed variable is less than 50.0 is:
if speed < 50.0:
print("The speed is low.")
This code uses the if keyword to create a conditional statement that checks the value of the variable speed. If the value is less than 50.0, then the code will print "The speed is low." to the screen. The print function is used to display the output. The code is indented to show the block of code that belongs to the if condition.
You can find more information about the if statement and the print function in Python in the following references:
Python If ... Else
Python Print Function
NEW QUESTION # 21
Arrange the code boxes in the correct positions in order to obtain a loop which executes its body with the level variable going through values 5, 1, and 1 (in the same order).
Answer:
Explanation:
NEW QUESTION # 22
Assuming that the phonc_dir dictionary contains namemumber pairs, arrange the code boxes to create a valid line of code which retrieves Martin Eden's phone number, and assigns it to the number variable.
Answer:
Explanation:
Explanation
number = phone_dir["Martin Eden"]
This code uses the square brackets notation to access the value associated with the key "Martin Eden" in the phone_dir dictionary. The value is then assigned to the variable number. A dictionary is a data structure that stores key-value pairs, where each key is unique and can be used to retrieve its corresponding value. You can find more information about dictionaries in Python in the following references:
[Python Dictionaries - W3Schools]
[Python Dictionary (With Examples) - Programiz]
[5.5. Dictionaries - How to Think Like a Computer Scientist ...]
NEW QUESTION # 23
What is the expected output of the following code?
- A. 0
- B. 1
- C. The code raises an exception and outputs nothing.
- D. 2
Answer: C
Explanation:
Explanation
The code snippet that you have sent is trying to print the combined length of two lists, "collection" and
"duplicate". The code is as follows:
collection = [] collection.append(1) collection.insert(0, 2) duplicate = collection duplicate.append(3) print(len(collection) + len(duplicate)) The code starts with creating an empty list called "collection" and appending the number 1 to it. The list now contains [1]. Then, the code inserts the number 2 at the beginning of the list. The list now contains [2, 1].
Then, the code creates a new list called "duplicate" and assigns it the value of "collection". However, this does not create a copy of the list, but rather a reference to the same list object. Therefore, any changes made to
"duplicate" will also affect "collection", and vice versa. Then, the code appends the number 3 to "duplicate".
The list now contains [2, 1, 3], and so does "collection". Finally, the code tries to print the sum of the lengths of "collection" and "duplicate". However, this causes an exception, because the len function expects a single argument, not two. The code does not handle the exception, and therefore outputs nothing.
The expected output of the code is nothing, because the code raises an exception and terminates. Therefore, the correct answer is D. The code raises an exception and outputs nothing.
NEW QUESTION # 24
......
Easy Success Python Institute PCEP-30-02 Exam in First Try: https://examcollection.vcetorrent.com/PCEP-30-02-valid-vce-torrent.html